|
Server
|
This setting in the Community String configuration
window displays as read only because you specified the server choice when you
performed the procedure in find a community string.
To change the server for the community string,
perform the find a community string procedure.
|
|
Community String
|
Enter a name for the community string. The name can
contain up to 32 characters and can contain any combination of alphanumeric
characters, hyphens (-), and underscore characters (_).
| Tip
| Choose community string names that will be hard
for outsiders to figure out.
|
When you edit a community string, you cannot change
the name of the community string.
|
|
Accept SNMP Packets from any host
|
To accept SNMP packets from any host, click this
button.
|
|
Accept SNMP Packets only from these hosts
|
To accept SNMP only from specified hosts, click this
button.
| Tip
| In the Host IP Address field, enter a host from
which you want to accept packets and click
Insert. Repeat this process for each
host from which you want to accept packets. To delete a host, choose that host
from the Host IP Addresses list box and click
Remove.
|
|
|
Access Privileges
|
From the drop-down list box, select the appropriate
access level from the following list:
- ReadOnly
The community string can only read the values of MIB objects.
- ReadWrite
The community string can read and write the values of MIB objects.
- ReadWriteNotify
The community
string can read and write the values of MIB objects and send MIB object values
for a trap and inform messages.
- NotifyOnly
The community string can only send MIB object values for a trap and inform
messages.
- ReadNotifyOnly
The community
string can read values of MIB objects and also send the values for trap and
inform messages.
- None
The
community string cannot read, write, or send trap information.
| Tip
| To change the trap configuration parameters,
you need to configure a community string with NotifyOnly, ReadNotifyOnly, or
ReadWriteNotify privileges.
IM and Presence Service does not support ReadNoticyOnly.
|
|
|
Apply To All Nodes
|
To apply the community string to all nodes in the
cluster, check this check box.
This field applies to Cisco Unified Communications Manager and IM and Presence Service clusters only.
|