|
Server
|
This setting displays as read only because you
specified the server when you performed the procedure to find an SNMP V3 notification destination.
To change the server for the notification
destination, perform the procedure to find an SNMP V3 notification destination and select a different server.
|
|
Host IP Addresses
|
From the drop-down list box, choose the Host IP
address or choose
Add New. If you chose Add New, enter the
IP address for the host.
|
|
Port Number
|
In the field, enter the notification-receiving port
number on the destination server.
|
|
Notification Type
|
From the drop-down list box, choose
Inform or
Trap.
| Tip
| Cisco recommends that you choose the Inform
option. The Inform function retransmits the message until it is acknowledged,
thus, making it more reliable than traps.
|
|
|
Remote SNMP Engine Id
|
This setting displays if you chose Inform from the
Notification Type drop-down list box.
From the drop-down list box, choose the engine ID or
choose
Add New. If you chose Add New, enter the
ID in the Remote SNMP Engine Id field, which requires a hexidecimal value.
|
|
Security Level
|
From the drop-down list box, choose the appropriate
security level for the user.
- noAuthNoPriv
No
authentication or privacy configured.
- authNoPriv
Authentication configured, but no privacy configured.
- authPriv
Authentication and privacy configured.
|
|
User Information pane
|
From the pane, perform one of the following tasks to
associate or disassociate the notification destination with the user.
- To create a new
user, click Create New User.
- To modify an
existing user, click the radio button for the user and then click
Update Selected User.
- To delete a user,
click the radio button for the user and then click
Delete Selected User.
The users that display vary depending on the
security level that you configured for the notification destination.
|
|
Apply To All Nodes
|
To apply the notification destination configuration
to all nodes in the cluster, check this check box.
This applies to Cisco Unified Communications Manager and IM and Presence Service clusters only.
|