| Step 1
| Install and configure the SNMP NMS.
|
| Step 2
| In the
Control Center - Network Services window,
verify that the system started the SNMP services.
|
| Step 3
| Unified Communications Manager: In the
Service Activation window, activate the Cisco
CallManager SNMP service. Cisco Unity Connection only: The Connection SNMP Agent service
automatically activates.
|
| Step 4
| If you are using SNMP V1/V2c, configure the community string.
|
| Step 5
| If you are using SNMP V3, configure the SNMP user.
|
| Step 6
| Configure the notification destination for traps or informs.
|
| Step 7
| Configure the system contact and location for the MIB2 system
group.
|
| Step 8
| Configure trap settings for CISCO-SYSLOG-MIB.
|
| Step 9
| Unified Communications Manager only: Configure trap settings for
CISCO-CCM-MIB.
|
| Step 10
| Restart the Master Agent service.
|
| Step 11
| On the NMS, configure the Cisco Unified Communications Manager trap parameters. |